Dynamic Load Management
Seamlessly integrate your charging infrastructure with a building, solar power, battery storage and your local Distribution Network Operator, thanks to our Gateway Connect.
Reliable hardware for your charging sites
Set up rapidly
The Gateway Connect integrates seamlessly without configuration into any charging infrastructure.
Plug and play network
An integrated 4G router provides a local network for the charging infrastructure.
Integrate freely
Easily connect and configure any connected energy asset, such as power meters, charging stations, etc. through HARMON-E.
1. Install locally on your charging hubs
Connect power meter, battery storage, solar power systems etc,.. with the Gateway Connect.
No local configuration
All you need is to connect the Gateway Connect to power and a local network to connect your charging infrastructure to the FLEXECHARGE Platform; everything can be done remotely.
Integrated Router
An integrated LTE Router supplies network access for any connected devices, drastically simplifying setup maintenance and improving reliability. An Independent local network provides the maximum level of security for the site owner.
Reliable hardware
No matter where you need to install the Gateway Connect, our industrial spec hardware and antenna setup always ensure perfect connection.
Access from anywhere
Every device connected to the Gateway Connect can be remotely accessed and managed.
Configure your Load & Energy Management
With access to any connected devices, you can configure everything within HARMON-E.
Monitor everything
Every Gateway Connect can be accessed through the HARMON-E platform, putting everything you need in one single place.
2. Commission Load Management with a few clicks
Configure your Load Management remotely in the time it takes to get a coffee.
3. Activate features and integrate extensions
Pick & choose the features that make up your use case. Connect extension software solutions to your infrastructure.
Powerful built-in features
Seamlessly apply features such as Multi-Level Clustering, Peak Shaving, Dynamic Allocation and more to your infrastructures.
Switching CPMS has never been as easy
Easily integrate additional software services such as CPMS, predictive maintenance software, etc. And swap them with just a few clicks,
Plug any charger based on OCPP
With the Broker architecture, it is easy to connect and control any charger based on the Open Charge Association's protocol. See certified chargers here.
.jpg)
Peter Brockhoff, CTO of Floading
Combining Static and Dynamic Load Management in one platform
It should not be "either or", but "and".
Read how our Gateway Connect revolutionizes edge computing devices and how our broker-based architecture combines the best of both worlds, resulting in the perfect orchestration of energy flows on your charging hubs.